Flash Master Flexible Hobby Blades 10x
Flexibele hobby mesjes die perfect gietlijnen kan verwijderen.
Flexes for your needs, and then springs right back to a beautiful straight edge.
Removing flash has never been more precise, or more satisfying. If the Flash Master can handle the flash on the face of this 1/72 figure, think what it can do in YOUR hands!
Will It Work With My Blade Handle?
The Flash Master works with most popular blade handles. However, the blades are small and super-slim, so the important question is: Does your blade handle close completely? If yes, you are all set. We’ve tried it on a number of blade holders from many manufacturers. If you’re in doubt, we know for certain that they will work with the X-Acto #1, the X-Acto #2, the Xacto Curve, and the X-Acto Griptster. If your blade holder won’t tighten to a complete close, chances are that there is some oxidization on the threads. (You may not have asked it to go that far in years.) Usually backing it off completely and knocking some old gunk off the threads does the trick. Reassemble and tighten without any blade in place to see if it closes until there is no gap in the blade slot. Then, back off just a little and slide the Flash Master in place and re-tighten.
Another Tool For Your Tool Kit
The Flash Master is not a replacement for the tried and true blades we all use. Think of it as an additional tool.
Let op mesjes worden zonder houder geleverd.